5 easy ways to repair your own hard drive

A hard drive is the most important thing in your computer because of an error and you may lose your data completely. However, you must be aware that the hard drive is a mechanical device, which will fail after a long time.

Statistics suggest 60 percent of hard disk failures are mechanical failures and are still caused by abuse. Here are some reasons for hard disk failure:

Physical damage occurs when a computer bumps into something.
Your air intake filter is clogged and your filter is not working properly due to the increase in heat causing the hard disk to fail.

The sudden disruption of the power supply can also cause an operation to cause hard disk failure.
Failure does not mean that you have lost your data. If the hard drive is still in good physical condition, you can repair it yourself. Here are five ways to fix your hard drive.

1-Disc check mode and Automatic Repair

If you’re using Windows from, it offers the easy option of checking your hard drive for errors and automatically fixing it. Here’s how you can review and fix disk issues:

Make sure you close all running programs with precautionary measures. Now launching my computer.
Now right-click on the hard drive you want to check. If the hard drive is external, make sure you are connected via USB cable. After right click goes to the property options.

When the window appears, go to the Tools tab and go to the error check. Click on the check. This requires admin permission, so make sure you have it. Verify or enter a password to allow.

Now select automatically Fix file system errors automatically scan and fix errors.

The scanning process will now start automatically. Depending on the size of your hard drive, this may take several minutes.

2- way between a hard drive and mainboard

Fixing this requires you to open a computer or laptop to check the connection between the hard drive and the mainboard. Due to a loss or bad connection, there may be no error. Before we begin this make sure the power procedure is turned off to prevent accidents. Open the rest of your computer’s Cabinet and follow these steps to check the connection between the hard drive and the mainboard:

You can see there are two types of cables one for SATA red and IDE in gray. Then there’s the SATA interface cable. Remove the two and make sure you clean them properly. If possible use Air-Conditioning Disposable Dust.

Newly reconnected for your drive must connect the SATA interface cable and the SATA power connector or the 4-pin Molex Connector.

Check your motherboard for SATA connectors. Perform the same cleaning procedure and connect the return cable.
Now restart your computer and check if the problem is resolved. If you don’t know how to open you Make sure your computer goes for a technician.

Step 3-way backup of your data to an external hard drive and broken hard drive format

Formatting is a great way to recover damaged hard drives in your home state. However, before you can format it, make sure you back up your entire data. You do not want to minimize outgoing important files.

Back up

You can back up your entire computer on an external hard drive and you can move it back after formatting your computer. You can always use third party software but windows give you built-in options from the control panel.

Now go to Start and open the control panel.
Now go to system and security.

Next, go to the history file and you have the option to save a backup copy of your file with the history file.

It scans the drivers you can use to back up all your data. Just select and click on the last round.

This will save you from important data on other disks.

Format

Open the control panel on your computer and go to System and Security.

Click administrative tools and open computer management.

Now go to the left panel under-saving, click Disk management. You’ll see your disk. Go to the disc and click the format.

This will format your discs individually. You can always retrieve your disk from behind until you have created it.

 

Step 4-If you are using a Mac, try the disk utility to repair the disk

If you’re using a Mac, you can use the disk utility to repair hard drives. This is an easy method, however, you will need your disk from Mac OS Please make sure you have backed up your data on another hard drive because during your repair you may have lost your important data.

You can see there are two types of cables one for SATA red and IDE in gray. Then there’s the SATA interface cable. Remove the two and make sure you clean them properly. If possible use Air-Conditioning Disposable Dust.

Newly reconnected for your drive must connect the SATA interface cable and the SATA power connector or the 4-pin Molex Connector.
Check your motherboard for SATA connectors. Perform the same cleaning procedure and connect the return cable.

Now select your disk from the left panel and then go to the repair disk.

Once the process is completed exit the installer and then go to select the starter disk instead of restarting.

Select your OS on the computer from the disk and then restart it.

Your computer will restart and check if the hard drive error persists. This method will resolve some errors but if there is a real problem with the hard drive it will be best to consult a technician.

 

Route 5-Replace the PCB on the hard drive

You can replace the printed circuit board on your hard drive if it is damaged or damaged. These rooms are provided by hard disk manufacturers. Contact the manufacturer to get the PCB needed for your hard drive. Use of the following steps to replace the following PCBs. Here are the steps to follow:

First, you need to choose the right PCB. For that, you need four things to match the model, section number, firmware, and label number. You can check the sticker above with the barcode. Find the Guide to find the matching guide.

Once you’ve found the chip for Switch, Switch to the new Board. It will require some experience of soldering and tools. Take into account old chips and new chips. This will be a bit technical, so be sure to check the replacement guide.

Now install your hard drive and check it works on your computer.

How to recover data after hard disk repair?
Once the hard drive has been repaired, you can recover lost data using Wondershare Data Recovery software, which is one of the most reliable and effective tools for recovering data. You can recover data in three steps:

Connect your disc to your computer. Launch Wondershare software on your computer. Click on the missing file recovery option.

On the next screen, select the hard drive you want to repair and click on the first scan.

On the next screen, you will have a list of recoverable files, select the file you want to recover and click recover.

Leave a Reply

Your email address will not be published. Required fields are marked *